Oxilife NG Sugar Valley - Low-Salinity Salt Chlorinator Hydrolysis

Oxilife NG Low-salinity salt chlorinators

Oxilife NG is a water disinfection system that uses two methods without the need to add chemicals.

The first is hydrolysis, which breaks the water molecule into hydrogen and oxygen, generating oxygen-based disinfecting agents such as O3, O2, OH-, H2O2, among others.

The second method is low-salinity Salt Electrolysis, where residual chlorine is generated from the salt present in the water. These combined methods make it possible to achieve effective water sterilization without additional chemicals.

The Oxilife NG low-salinity hydrolysis and Low Salt chlorine generator guarantees the elimination of bacteria, fungi, and other impurities that pose a threat to your health through these two processes, without the use of any auxiliary chemicals.

This updated version of the Oxilife chlorinator includes a transparent probe holder probe holder for quicker identification of pH and Redox sensor management.

Thanks to its included temperature probe, the Oxilife can perform chlorination in “smart” mode, adapting the disinfectant production to the needs of the pool.

The Oxilife system also allows a complete management of the pool from a single device, since it allows to control and automate the pH level and redox from the same device.

Finally, the Oxilife Low Salt chlorinator allows remote control via WIFI or Ethernet, through the free Poolwatch application, or by connecting the device to automatons with modbus protocol.

This low salinity salt chlorination model is available in different production models for residential pools (models OX0 = 8g/h, OX1 = 15g/h, OX2=22g/h).

The pH pump is not working, and an AL3 signal appears on Oxilife. What’s going on?

The Hayward Aquarite + Touch and the Hidrolife Touch have a pH reducer over-dosing control function. When the unit detects that the dosing pump has been running for too long, it activates the AL3 alarm and stops the pH dosing pump. To restart it, check that the bottle has product in it, check that the pH measuring probe is in good condition and, once you are sure that the system is correct, press for 3 seconds on the pH circle to remove the AL3 alarm.