Aquapool Sand or pool glass cleaner

Aquapool Sand or pool glass cleaner

The Sand and Glass Cleaner Aquapool is a product designed to clean, degrease and disinfect the filtering bed of swimming pool filters, whether composed of sand or glass. It comes in two formats: 1 liter and 5 liters.

Properties:

• Powerful liquid cleaner that acts as a grease and oil solvent.
• It works as a descaler, algaecide, antifreeze and descaler for the filter and its sands.
• Restores the filtering capacity of sands and can also be used in glass filters.
• Special for clogged filters
• Reduces filter biofilm.

How to use – How to clean the sands of the swimming pool filter:

At the end of the bathing season, partially empty the water from the filter and close the outlet tap. Before adding the product, check the condition of the sands and change or refill the filter contents if necessary.

The dosage of the product varies according to the capacity of the pool:

• For pools between 40 and 100 m3 capacity, use 2 to 3 liters of product.
• For pools between 100 and 200 m3 capacity, add 5 liters of product.
• Add the dose directly on the sand or glass of the filter. It is important that the sands are completely submerged. If they are not completely submerged with the proper dosage, add water to cover them and close the filter again.

It is recommended to leave the treatment on throughout the winter. However, if it is applied at the beginning of summer, it should be left to act for at least 2 days. Before the beginning of the swimming season following the application of the treatment, backwash the filter to prevent dirt from ending up in the pool. Turn the filter tap to the drain position and repeat this cleaning 3 to 4 times, or until the water is sufficiently clean.

Follow the instructions provided by the manufacturer for best results and safe use of the product.