Spare Part Original Bio-Pool C-Line V3 Cell - With Communication Card - BIO-POOL Compatible

-13%

Sale!

From 288€

- 8 - 15 g/h.
- Self-cleaning.
- Cell housing not included.
- From 20 m³ Up to 60 m³.
- From 2 to 4 blades.

g/h production

Clear

Got questions?

Restore the maximum efficiency of your salt chlorinator with the complete range of original Bio-Pool C-Line V3 cells. Each cell is manufactured with high quality solid titanium blades, integrating an electronic communication card in the head, designed to interact intelligently with your salt chlorinator.

They are the exact replacement for new generation C-Line equipment that requires bidirectional communication between the cell and the control unit. They have a self-cleaning system and are optimized to work with salt levels of 4.5 to 6 g/L, ensuring precise and long-lasting disinfection.

Choose the correct version according to the number of blades in your current cell. The dimensions of the blades are identical in the three models (100 x 85 mm), what changes is the quantity to adapt to the volume of your pool.

Compatibility Original Bio-Pool C-Line V3 Cell

Compatible with Bio-Pool C-Line salt chlorinators prepared for V3 cells.

Features Original Bio-Pool C-Line V3 cell

V3 Intelligent Technology: Integrated communication card included.
Self-cleaning system: Polarity inversion to avoid limescale.
Compatibility: Exclusive for Bio-Pool C-Line equipment prepared for V3 cells.
Technology: Self-cleaning (Self-cleaning).
Required salinity: Optima works optimally between 4.5 and 6 g/L.
Warranty: 2 Years Official.
Models: The cell is available in models with 2, 3 and 4 blades.

Replacing the cell in time prevents damage to the chlorinator power supply. If your chlorine production has dropped drastically or the “Low Salt” indicator lights up even though you have the correct salt, it’s time to change it.

If you have any questions, do not hesitate to contact us by whatsapp for more information.

	Technical Data Sheet Original Bio-Pool C-Line V3 Cell
No. of blades	Production (g/h)	Pool volume (m³)
2 Blades	~ 6-8 g/h	Spas or swimming pools < 20 m³
3 Blades	~ 10-12 g/h	Up to 40 m³
4 Blades	~ 15 g/h	Up to 60 m³

What is the communication card used for?

It allows the chlorinator to know exactly the state of the cell, optimize polarity reversal and adjust production more accurately than older models.

Is it difficult to install? Do I need a technician?

No, it is a very simple process. Just turn off the pump, close the stopcocks, unscrew the old cell, disconnect the wires and insert the new one. It is important that the terminals are tightened securely to prevent them from overheating.

Do I have to change the pool water to put in a new cell?

It is not necessary to change the water unless the level of Stabiliser or total salts (TDS) is excessively high. What is mandatory is to balance the pH between 7.2 and 7.4 before turning on the new cell, as the electrolysis process tends to naturally raise the pH.

Is it suitable for hot water?

Yes, it is suitable, but remember that the higher the water temperature, the higher the chlorine demand. If it is for a hot water spa, be sure to control the pH rigorously so as not to damage the blades.

Additional information