Spare part Cell Replacement for Clean Salt Chlorinator - Compatible with BIO-POOL 3G/L - HAYWARD AQUARITE PRO - HAYWARD AQUARITE - HAYWARD - LIMPIDO

-16%

Sale!

From 919€

FREE SHIPPING

- 3 to 4 g/l.
- Self-cleaning.
- Cell housing not included.
- 100m³ or 160m³.
- 7 and 13 blades.

g/h production

Clear

Got questions?

High quality Salt Electrolysis cell, designed as a direct replacement for disinfection systems in residential pools. This component is self-cleaning (by polarity reversal) and has long-life titanium blades treated to optimize chlorine production. It is easy to install thanks to its 2-terminal (2-pin) connection, ensuring efficient conductivity and minimum water maintenance.

Model 100: Recommended for pools with a water volume of up to 100 m³.
Model 160: Recommended for pools with a water volume of up to 160 m³.

Compatibility Cell for Salt Chlorinator Limpido / Hayward

Limpido: Compatible with the standard Limpido series (XC, Duo, etc.).
Hayward: Hayward AquaRite
Hayward AquaRite Pro
Bio-Pool: Models operating at 3g/L salt concentration.
Other brands: It is compatible with any system using the cell reference C13P or C20P under the 2-pin connection standard.

Features Salt Chlorinator Cell Cleaned / Hayward

Spare part type: Internal electrode (Cell).
Plate dimensions: 250 x 38 mm.
Material: High conductivity solid titanium (with ruthenium/iridium coating).
Cleaning: Self-cleaning (polarity inversion).
Working Salinity: 3 to 4 g/L (Standard Salt).
Warranty: 2 years.
Number of blades:
- For the 160 m³ model: 13 blades.
- For the 100 m³ model: 7 blades.

Note: The difference in the number of blades is precisely what defines the capacity of each model (the more blades, the greater the contact surface and the greater the chlorine production), maintaining the same external dimensions so that both fit in the same cell housing.

Replacing the cell in time prevents damage to the chlorinator power supply. If your chlorine production has dropped drastically or the “Low Salt” indicator lights up even though you have the correct salt, it’s time to change it.

If you have any questions, do not hesitate to contact us by whatsapp for more information.

	Technical Data Sheet Original Bio-Pool Cell – Saltline
No. of blades	Production (g/h)	Pool volume (m³)
7 Blades (Mod. 40)	20 g/h	Up to 100 m³
13 Blades (Mod. 60)	32 g/h	Up to 160 m³

Is it really compatible with my equipment?

Remind them to verify that their old cell has 2 terminals (2 pins) and not 3. It confirms that it is suitable for brands such as Hayward, Limpido and Bio-Pool.

Is the cell difficult to install? Do I need a technician?

No, it is a very simple process. Just turn off the pump, close the stopcocks, unscrew the old cell, disconnect the wires and insert the new one. It is important that the terminals are tightened securely to prevent them from overheating.

Do I have to change the pool water to put in a new cell?

It is not necessary to change the water unless the level of Stabiliser or total salts (TDS) is excessively high. What is mandatory is to balance the pH between 7.2 and 7.4 before turning on the new cell, as the electrolysis process tends to naturally raise the pH.

Can I put the 160m³ pool if my pool is 80m³?

Yes, it can be installed because they are physically the same size. The advantage is that the pool will be disinfected in fewer hours, but be warned that you should adjust your chlorinator settings so as not to over-chlorinate.

Additional information

Brand	Hydrantis
Manufacturer	BIO-POOL
g/h production	13 Blades 32 g/h, 7 Blades 20 – 24 g/h

Reviews

There are no reviews yet.

Show only reviews in English (0)

Be the first to review “Spare part Cell Replacement for Clean Salt Chlorinator – Compatible with BIO-POOL 3G/L – HAYWARD AQUARITE PRO – HAYWARD AQUARITE – HAYWARD – LIMPIDO”