The Dreame Z1 is a self-contained pool cleaning robot designed to operate without a power cord, equipped with rechargeable battery and propulsion system using dual pump motors. The equipment integrates a suction system with a maximum capacity of approximately 8,000 GPH, combined with double cleaning brushes and 180 micron internal filtration, configured to capture common particles such as leaves, sand and sediments.

The navigation system uses detection technology combined with ultrasound and 3D structured light to identify boundaries, walls and obstacles during travel. This sensor scheme facilitates perimeter scanning and route planning within the pool basin cell housing. The equipment is prepared to clean bottom, walls and waterline, with an operating cycle of more than 180 minutes per load.

The robot is powered by a rechargeable battery with magnetic charging system and an approximate recharge time of 4 to 6 hours. Its wireless design eliminates floating cables in the pool and allows it to operate in residential pools of various materials, including chlorinated installations or saltwater systems with concentrations up to 5,000 ppm.

Features of Dreame Z1 swimming pool cleaning robot

High flow suction system

The equipment integrates a pump with a maximum suction capacity close to 8,000 gallons per hour, generating the necessary flow to transport solid waste to the internal filtration system. This configuration is combined with two independent pump motors to maintain hydraulic stability during displacement.

Total management and double mapping: DREAME app

Control of cleaning maps, monitoring and total control through your mobile device thanks to the DREAME app. Total and optimized cleaning of your pool in the palm of your hand.

PoolSense™ intelligent navigation with multiple sensors

The positioning system uses ultrasound detection and three-dimensional structured light to identify cell housing geometry, edges and obstacles. This technology facilitates perimeter scanning and planning of cleaning trajectories in adaptive patterns. The Z1 Automatic Cleaning Robot automatically recognizes different pool shapes and adjusts its cleaning strategies and routes for optimal results. Its advanced zoning algorithms and S-shaped paths are ideal for complex and hybrid pools.

Double brush system

The robot incorporates dual rotating brushes, configured to remove biofilm, adhering dirt and sediment from the coating. The movement of the brushes improves the capture of particles before they are sucked by the pump.

180 μm internal filtration

The filtration system uses a 180-micron mesh cartridge, sized to retain solid debris such as small leaves, sand or organic particles. The filter is accessible for cleaning and maintenance after each work cycle.

Benefits of Dreame Z1 swimming pool cleaning robot

• Integral cleaning of the pool basin: The vertical displacement capacity allows to cover floor, walls and waterline in the same cycle. This reduces the need for manual intervention with brushes or external vacuum cleaners.
• Elimination of in-water wiring: Battery operation eliminates the use of in-pool power cables. This configuration reduces tangles during travel and simplifies equipment installation.
• Adaptation to different geometries: Sensor-based navigation allows for edge and obstacle detection. This improves coverage in irregularly shaped pools or pools with depth changes.
• Compatibility with treated water: The equipment materials are designed to operate in pools with moderate chlorine or salinity, maintaining performance in salt concentrations up to 5,000 ppm and chlorine levels up to 4 ppm.