On MOVA Handler V10 is a cordless handheld vacuum pool cleaner designed for localized cleaning of pools, spas and jacuzzis. It integrates an electric suction motor with a maximum flow rate of 4,200 L/h (18.5 GPM) and an interchangeable filtration system with reusable bags of 30 μm and 300 μm, allowing the retention of both fine particles and larger debris. Its operation is based on an integrated axial flow pump that maintains a constant flow rate during suction of sediment, sand, leaves or algae present on the bottom or in shallow areas.

The unit incorporates a removable transparent suction head, which facilitates visual inspection during cleaning and allows for more precise approach to edges, steps or corners when removed. The system works with an integrated rechargeable battery with an autonomy of approximately 60 minutes and full recharge in 1.5 hours, which allows complete maintenance cycles in domestic pools or medium-sized spas.

The set is complemented by a 1.8 m telescopic aluminum pole, designed to work at depths between 0.2 and 3 m, and a 1.8 L waste container that reduces the frequency of emptying during the cleaning process. The system is prepared to operate in different types of pools – in-ground or above ground – and in spa or hydromassage installations, maintaining a silent operation close to 50 dB and IPX8 degree of protection for submerged work.

Features of the MOVA Handler V10 Manual pool vacuum cleaner Automatic Cleaner for swimming pools

4,200 L/h hydraulic suction system

The equipment incorporates an electric motor with a maximum suction flow of 4,200 liters per hour, designed to remove fine sediments, sand, hair, leaves and small mineral particles. This flow rate is maintained by an optimized flow line that reduces pressure losses during suction.

Dual filtration with reusable bags

The filtration system uses interchangeable 30 μm and 300 μm bags, allowing the retention level to be adapted according to the type of residue present. The fine filter captures suspended particles and light sediments, while the larger micron filter facilitates the collection of bulky debris without clogging.

Detachable transparent suction head

The front head made of transparent material allows a visual check of the suction area during the cleaning process. Its detachable design facilitates access to edges, corners or steps where a standard head may limit the approach.

Stand-alone system with rechargeable battery

The unit operates without direct electrical connection by means of an integrated battery that provides up to 60 minutes of continuous operation. The fast charging system completes the cycle in approximately 1.5 hours, reducing waiting times between cleaning cycles.

Benefits of the MOVA Handler V10 Manual Pool Vacuum Automatic Cleaner

• Localized cleaning without hydraulic connection: By not depending on the pool’s filtration system or suction hoses, the equipment allows spot cleaning in specific areas without modifying the existing hydraulic circuit.
• Adaptation to different types of debris: The double filtration allows the selection of the appropriate retention level according to the type of dirt present, avoiding premature saturation of the filter during the suction of leaves or coarse particles.
• Access to shallow areas and steps: The manual design with telescopic pole allows direct intervention in areas where robot pool cleaning robots or automatic vacuums have less coverage capacity, such as platforms, steps or beach areas.
• Simplified maintenance: The 1.8 L waste tank reduces the frequency of emptying during operation and the quick drain system allows the evacuation of retained water when the unit is removed from the pool.