Automatic Cleaning Robot Pool cleaning robot ER 230 Gre

This Gre ER 230 pool cleaning robot is an automatic cleaning equipment designed for residential and commercial pools up to 9 m long and 4 m wide, which allows a complete cleaning of the bottom, walls and waterline in a single work cycle. The chassis incorporates a traction motor that provides controlled travel over flat surfaces and gentle slopes, optimizing work area coverage. The filtration system is based on patented cyclonic suction technology and has a 3 L capacity filter with a filtration level of 150 microns, suitable for retaining medium and fine debris.

The electric cleaning robot integrates two separate motors, one dedicated to the traction and the other to the suction system, which improves the operational efficiency during the complete cleaning cycle of approximately 2 h. The unit includes a standard brush that performs active brushing of the surfaces, facilitating the descaling of adhered particles. Access to the filter is from the top of the housing, which facilitates maintenance without the need for direct contact with debris.

The floating cable has a length of 15 m, allowing the robot to cover most of the surface of medium-sized pools without restrictions. This technical configuration makes the ER 230 suitable for installations with regular shapes and gentle slopes, providing an automatic solution for periodic pool cleaning maintenance with simple operation requirements and consistent results.

Features of the ER 230 GRE swimming pool cleaning robot

Motorized traction system:

The equipment is equipped with a traction motor that drives the robot to move over the bottom and walls of the pool, maintaining effective contact with flat or gently sloping surfaces during the work cycle.

Patented Ciclon suction system:

It incorporates a suction system that creates a cyclonic flow inside the filter, keeping debris in suspension and reducing the likelihood of clogging filter media, ensuring prolonged suction throughout the cycle.

Filtration capacity of 3 L:

Rigid filter with a volume of 3 liters and a filtration level of 150 microns, designed to retain fine particles and medium debris without compromising water flow, with top access for quick maintenance.

Coverage for cleaning:

Cleaning capacity up to 36 m² per cycle, covering bottom, walls and water line in a single process of approximately 2 h, suitable for pools up to 9 x 4 m.

Benefits of the ER 230 GRE pool cleaning robot

• Integral autonomous operation: The combination of motorized traction, cyclonic suction and active brushing allows the cleaning of all submerged surfaces without continuous supervision, freeing the operator from frequent interventions.

  Simplified maintenance: The top access to the filter and its 3 L capacity facilitate the tasks of emptying and cleaning the filter media, reducing maintenance times and avoiding direct contact with collected residues.

  Adaptation to medium pools: The technical design and floating cable length offer sufficient coverage for typical residential pools, achieving complete cleaning of up to 36 m² without cable rearrangement.

  Efficiency in waste capture: The 150 micron filtration and the Ciclon system extend the suction performance during the cycle, reducing the frequency of operator intervention for filter cleaning.